To configure a cutter:
- Click the Configure button in the top right corner of the Cutter Panel for the cutter you wish to configure.
- Under Port Settings, select the port you use. Click Setup to select your port settings.
- Enable/Disable Auto-forwarding. If enabled, cut jobs are automatically cut as soon as they arrive in the queue. Once cut, the jobs are then archived.
- In the Device Settings area, you can Add, Delete, and Configure your settings. These settings control your cutter specific settings like knife pressure and speed.
Cutter options are broken into three sections in the cutter dialog: Device, Job
, and Layers (depending on the cutter being used) so that you can configure all of the options more accurately.
NOTE: Because the settings for each cutter are different, consult the user manual for your cutter for assistance configuring your Port Settings and Device Settings.
Figure 1